Hey all, so I recently moved my snake into a 4 x 2 x 2 PVC tank from Cornel’s World with hinged acrylic doors and an 80 watt RHP connected to a Herpstat 2 on Dimming mode, runs at 100%. Hot side temps range around 87-88 and cool side is 77-80. After trouble shooting with the Herpstat, I got the temperatures right and transferred him without issue, but my humidity levels are really starting to annoy me. I know it’s normal to have a humidity gradient but my issue is that it drops so quickly. I’m having to spray the tank 4x a day or more which I don’t think is normal. I use Govee thermo/hygrometers on the cool side and in the middle, and an Accurite thermo/hygrometer with a probe on the hot side. I just cannot seem to get a stable reading on my cool end (I was told this was the most practical way to measure humidity). Should I try pouring water in the corners? I don’t want to get mold which I’ve had an issue with in the past.. I use coconut husk fiber from Exo Terra as substrate. I have a large water bowl on the hot side to help with humidity but it doesn’t seem to be helping. Within a few hours, my hot and middle meters are reading 50% or lower and my cool side, when first sprayed reached up to 95% and then slowly drops within hours to 60%, then I have to spray again. I do not spray the door as I don’t want hard water stains.. should I start doing that? Does anyone have any tips?