» Site Navigation
0 members and 779 guests
No Members online
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,908
Threads: 249,107
Posts: 2,572,126
Top Poster: JLC (31,651)
|
-
-
The Following 6 Users Say Thank You to BR8080 For This Useful Post:
jmcrook (04-25-2017),JodanOrNoDan (04-25-2017),Lizardlicks (04-25-2017),Prognathodon (04-25-2017),rock (04-25-2017),Sauzo (04-25-2017)
-
Looks good man. Hey, you had Pro Product RHPs installed in the middle and bottom cages too i assume? How did they mount the RHPs? With just screws? I know Pro Products gives you like 1/4" bolts to mount it but the head of those bolts wouldn't allow the cages to sit flush.
And i assume also you had the LEDs installed? Did they just mount the RHPs in front of the lights and then drill a hole out the top next to the RHP and then route the channel perpendicular to how the lights sit in the cage?
Can you snap pics? I ask because with my T25s, if i do need to install RHPs, I'll end up doing it myself as i won't know until winter if i need the extra heating because of the cage size. Trying to figure what size screws I'll need to mount it and then figure out a way to run the cord. Dont really want to run it across the LED lights but also dont really want to run it out the side.
I talked to Ali and she said butt the RHP against a wall and then drill a hole so the cord comes out the side and there is no cord showing at all inside the cage. I thought this could work if i used cable clamps and clamped down the cord on the outside of the cage along the top of the side and then just before putting the plug on, slide on black electrical shrink wrap so it blends in with the cage color.
0.1 Rio Bravo Pokigron Suriname BC-Gina
1.0 Meltzer/Lincoln Peruvian Longtail het anery BCL-Louie
0.1 Biak Green Tree Python-Pat
1.0 OSHY Biak Green Tree Python-Alex
0.0.1 Super Reduced Reticulated Gila Monster-Dozer
0.0.1 Utah Banded Gila Monster-Tank
0.0.1 Super Black Beaded Lizard-Reggie
-
-
3.0 Carpet Pythons, 1.1 Bullsnakes
1.0 Olive Python 1.0 Scrub Python,
1.0 BI, 0.1 BCO
-
The Following User Says Thank You to EL-Ziggy For This Useful Post:
-
-
The Following User Says Thank You to JodanOrNoDan For This Useful Post:
-
I love your build, but I also love the fact that your house has this EXACTLY PERFECT little cubby for the cages lol.
-
-
Re: Finally!!!
 Originally Posted by Sauzo
Looks good man. Hey, you had Pro Product RHPs installed in the middle and bottom cages too i assume? How did they mount the RHPs? With just screws? I know Pro Products gives you like 1/4" bolts to mount it but the head of those bolts wouldn't allow the cages to sit flush.
Thanks John....yes, PP RHP's in all 3 enclosures...2 in the middle actually as it's divided. They use a flush mount so they stack really well.
And i assume also you had the LEDs installed? Did they just mount the RHPs in front of the lights and then drill a hole out the top next to the RHP and then route the channel perpendicular to how the lights sit in the cage.
I had AP route a 10mm channel for LED's I bought on AMAZON....HUGE mistake....I should've just had AP put theirs in. That's what I get for trying to save a few bucks and be fancy with the ability to change colors. TOTALLY unnecessary and a novice move on my part. The new T10 will have their LED's in it. Yes, the channel makes a 90 degree turn and through to let the plug go out the back.
Can you snap pics? I ask because with my T25s, if i do need to install RHPs, I'll end up doing it myself as i won't know until winter if i need the extra heating because of the cage size. Trying to figure what size screws I'll need to mount it and then figure out a way to run the cord. Dont really want to run it across the LED lights but also dont really want to run it out the back.
I'll try get a good pic...I'm sure if you asked Ali what they use she'd tell ya. She's awesome.
I talked to Ali and she said butt the RHP against a wall and then drill a hole so the cord comes out the side and there is no cord showing at all inside the cage. I thought this could work if i used cable clamps and clamped down the cord on the outside of the cage along the top of the side and then just before putting the plug on, slide on black electrical shrink wrap so it blends in with the cage color.
It's really cool how they drilled and routed for the cord to exit the enclosure and still be able to stack them....they've got a good thing going there.
 Originally Posted by Lizardlicks
I love your build, but I also love the fact that your house has this EXACTLY PERFECT little cubby for the cages lol.
Thanks, it was an old closet I opened up to just be part of the room as it's my office and not a third bedroom any longer.. I will admit I lucked out that it's the perfect width as I did it 4 years ago when I bought the place.. If that didn't work my safe would've gone in there and the enclosures where my safe sits on the wall next to it...LOL No picture of that yet as the room is a disaster right now with my original rack in the middle of the room, sorry.
The top flush mount for the RHP's

RHP wire from insdie....

RHP wire from the top sits nicely in a channel.

The light channel from the top....plug just runs out from the inside channel...again I'd go with AP's LED next time...

Ball Python
0.1 Lesser (Lucille) local pet store
Boas
0.1 Caulkers Cay (CC) from TJ Blevins (Second City Constrictors)
1.0 Sunglow het moonglow (Sonny) from Dustin Dirnberger
1.0 BCI - DH Sharp Snow (Bob) from TJ Blevins (Second City Constrictors)
1.0 Brazillian Rainbow Boa (Babylon) from Ike Lightener (Ike's Exotics & Aquatics)
Pythons
0.0.1 Unknown/undocumented rescue (Roger)
1.0 Northern White Lip (Solo)
Cats
1.1 Domestic short hair (Esther and James)
Snake Wishlist
Drymarchon Malanurus (Black Tail Cribno)
SD/D Retic
Woma or Black Headed Python
Other Reptile Wishlist
Poison dart frogs
-
The Following User Says Thank You to BR8080 For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|