» Site Navigation
1 members and 2,929 guests
Most users ever online was 6,337, 01-24-2020 at 04:30 AM.
» Today's Birthdays
» Stats
Members: 75,087
Threads: 248,528
Posts: 2,568,676
Top Poster: JLC (31,651)
|
-
-
-
Yes, plenty big enough. Are those the same hides he is already used to? They seem huge for a 1y BP. Whatever you have in his other enclosure I would put in the tub unless it's too tall to fit, in which case I would replace it with something similar so he doesn't feel overwhelmed with empty space.
Edit: missed the bit about the hides being new. They seem way too big. Not sure why he needed new hides, but if it's because they are too small, something intermediate would be better. Those look big enough for a full grown adult.
Last edited by nikkubus; 07-12-2021 at 02:16 PM.
7.22 BP 1.4 corn 1.1 SD retic 0.1 hognose
-
The Following User Says Thank You to nikkubus For This Useful Post:
-
Re: Is this plastic tube big enough?
Originally Posted by nikkubus
Edit: missed the bit about the hides being new. They seem way too big. Not sure why he needed new hides, but if it's because they are too small, something intermediate would be better. Those look big enough for a full grown adult.
Agreed, the measurements OP gave for those hides are the same as the large pangea reptile hides. I have my 1 year old BP in mediums that are about 3 inches shorter than the large and they work great. Larges will probably be needed down the road, but my guy is closer to 3 feet stretched out and fits fine in a medium.
-
-
Re: Is this plastic tube big enough?
Originally Posted by nikkubus
Yes, plenty big enough. Are those the same hides he is already used to? They seem huge for a 1y BP. Whatever you have in his other enclosure I would put in the tub unless it's too tall to fit, in which case I would replace it with something similar so he doesn't feel overwhelmed with empty space.
Edit: missed the bit about the hides being new. They seem way too big. Not sure why he needed new hides, but if it's because they are too small, something intermediate would be better. Those look big enough for a full grown adult.
Oh dear, that's too bad. I'm terrible at judging sizes (this is my only snake so I'm very much still learning). I looked at the site just now and definitely misread. The medium boxes are recommended for BPs up to 700 grams (his last weigh in was barely 400) while the ones I got are for full adults. Oops.
He needs new hides because I started out with the log tunnel types. I know hides are best with one entrance so they're shoved up against the tank wall, and the walls have black foam board over them on the outside so it's perfectly dark for him. But he's gotten too big and both barely fits in them anymore and is too strong to where the logs constantly get moved away from the wall just by his movement, so the "one entrance security" aspect gets ruined. He doesn't seem too bothered by it but I'd imagine he'd prefer to have a hide where he's not sticking out of both ends like a hot dog too big for its bun.
So I'm guessing I need to get a couple of the medium hides then?
-
-
Re: Is this plastic tube big enough?
Originally Posted by Snagrio
So I'm guessing I need to get a couple of the medium hides then?
Not at all bud, you can divide the large ones you have already. You can use cardboard, moss, anything that you can split the hide to make it smaller just like you would a larger enclosure while your BP grows into them.
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to Hugsplox For This Useful Post:
-
Re: Is this plastic tube big enough?
Originally Posted by Hugsplox
Not at all bud, you can divide the large ones you have already. You can use cardboard, moss, anything that you can split the hide to make it smaller just like you would a larger enclosure while your BP grows into them.
Sent from my iPhone using Tapatalk
That's not a bad idea. I can just stuff the hides with moss and he can make "nests" out of them as he pleases.
-
The Following User Says Thank You to Snagrio For This Useful Post:
-
Got everything together to set things up tomorrow, but I'm debating if I even need the CHE. The tub is so shallow and closed in that I wonder if the UTH on its own will be enough. Would certainly be easier on the mind because even with thermostats I'm worried a CHE would be too much for such a low space (remember this tub is barely half a foot tall), not to mention I'm worried if having to carve out of meshed hole for it would lead to similar humidity-retaining issues I've been having as is.
For the record though, all of this is doubled from what is already set up from his current enclosure. All new heating, 'stats, ect. so I'm not pulling down what he's currently living in and can take my time testing things out.
-
-
Re: Is this plastic tube big enough?
Originally Posted by Snagrio
Got everything together to set things up tomorrow, but I'm debating if I even need the CHE. The tub is so shallow and closed in that I wonder if the UTH on its own will be enough. Would certainly be easier on the mind because even with thermostats I'm worried a CHE would be too much for such a low space (remember this tub is barely half a foot tall), not to mention I'm worried if having to carve out of meshed hole for it would lead to similar humidity-retaining issues I've been having as is.
For the record though, all of this is doubled from what is already set up from his current enclosure. All new heating, 'stats, ect. so I'm not pulling down what he's currently living in and can take my time testing things out.
Take a look at the below thread too, it's jmcrook's quarantine set up he uses. I always try to link people to this one, and I hope crook doesn't mind, because I think it's dumb easy to set up and have used it myself. You can elevate the CHE as done in his photos so the height of the tub itself shouldn't matter. Just in case the UTH ends up not being enough, wanted to give you another option.
https://ball-pythons.net/forums/show...Quarantine-Tub
-
The Following User Says Thank You to Hugsplox For This Useful Post:
-
Re: Is this plastic tube big enough?
Originally Posted by Hugsplox
Take a look at the below thread too, it's jmcrook's quarantine set up he uses. I always try to link people to this one, and I hope crook doesn't mind, because I think it's dumb easy to set up and have used it myself. You can elevate the CHE as done in his photos so the height of the tub itself shouldn't matter. Just in case the UTH ends up not being enough, wanted to give you another option.
https://ball-pythons.net/forums/show...Quarantine-Tub
Upon further study, a CHE will be mandatory. Ambient temperature is around 70 here in the basement where he lives, and it will only get colder going into winter. Rather curious that there isn't even a hole cut out of the lid in the image though, the heat is strong enough to go right through it without melting?
Also I've had trouble making air holes in the sides of the tub yesterday. Tried using the heated head of a glue gun and heating a screwdriver to melt open openings but neither made so much as a dent. I figure I'm either going to get a soldering iron or try a method I saw on YT where a metal pipe was put over an open fire and pushed through the plastic to make holes. Probably the former since I need to go to the store to get more heat-resistant tape anyway.
-
-
Re: Is this plastic tube big enough?
Originally Posted by Snagrio
Upon further study, a CHE will be mandatory. Ambient temperature is around 70 here in the basement where he lives, and it will only get colder going into winter. Rather curious that there isn't even a hole cut out of the lid in the image though, the heat is strong enough to go right through it without melting?
Also I've had trouble making air holes in the sides of the tub yesterday. Tried using the heated head of a glue gun and heating a screwdriver to melt open openings but neither made so much as a dent. I figure I'm either going to get a soldering iron or try a method I saw on YT where a metal pipe was put over an open fire and pushed through the plastic to make holes. Probably the former since I need to go to the store to get more heat-resistant tape anyway.
I've found the heat from the CHE will heat up the lid and the air in the enclosure with no issue. As far as air holes, I've always used a wire clothes hanger. Cut the bottom of it with a pair of tin snips or wire cutters, and then just heat it up with a candle or something similar, obviously exercise a lot of caution here as everything will be hot, then just push through the sides or top to create your holes. This works a lot better than a screw driver because your pressure point, the end of the wire hanger, is much smaller and doesn't require as much heat or force to penetrate the plastic.
Just be careful, it's easy to hurt yourself.
Edit to add: Just to be clear, and I know I may not need to say it but just to say I did, as with any other enclosure, that Q set up with a tub runs for a week or so before anything goes in it. Still needs a thermostat and thermometer and hydrometer, same process as setting up a new PVC or glass enclosure.
Last edited by Hugsplox; 07-22-2021 at 03:10 PM.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|