» Site Navigation
1 members and 3,135 guests
Most users ever online was 6,337, 01-24-2020 at 04:30 AM.
» Today's Birthdays
» Stats
Members: 75,093
Threads: 248,535
Posts: 2,568,705
Top Poster: JLC (31,651)
|
-
Registered User
Increasing and controlling humidity
Hi all,
It seems as though I need to consistently increase humidity, I live in a very dry area. Misting works, but I'd like a bit better of a setup.
Could I hook up a fogger to this? https://www.amazon.com/Humidity-Cont...dp/B01J1E5LWM/
Would I need a dehumidifier with this or would this work the same as a thermostat in which it would stop the humidifier once it got to the desired percent, and then start back up if it dropped below a certain threshold? Sorry for the dumb question, very new to all this and am trying to learn as best I can.
-
-
Re: Increasing and controlling humidity
Originally Posted by ayushables
Hi all,
It seems as though I need to consistently increase humidity, I live in a very dry area. Misting works, but I'd like a bit better of a setup.
Could I hook up a fogger to this? https://www.amazon.com/Humidity-Cont...dp/B01J1E5LWM/
Would I need a dehumidifier with this or would this work the same as a thermostat in which it would stop the humidifier once it got to the desired percent, and then start back up if it dropped below a certain threshold? Sorry for the dumb question, very new to all this and am trying to learn as best I can.
A dehumidifier isn't going to control anything, it does exactly what it's name suggests, and sucks moisture out of the air. What you need is a humidity controller. Hydrotherm, zoomed, and several other brands exist and I don't think they're super expensive, but essentially they work the same as a Tstat, just with moisture instead of temperature. I have zero experience with these systems though to be clear, I ordered a PVC enclosure to solve my humidity issues once and for all. Got a little tired of misting multiple times a day in my glass enclosure.
-
-
There are a lot of steps you can take before needing to add a mister or any other additional equipment.
If you can tell us more about your setup we can get you sorted out without you spending unnecessary money. I live in MA where winter gets pretty dry. I don't even need to mist my enclosures in winter unless maybe to boost humidity during shed.
What type/size enclosure?
What substrate?
How are you heating the enclosure?
What type/size water bowl?
-
The Following 3 Users Say Thank You to Craiga 01453 For This Useful Post:
dakski (10-16-2020),EL-Ziggy (10-16-2020),jmcrook (10-16-2020)
-
Re: Increasing and controlling humidity
Originally Posted by Craiga 01453
There are a lot of steps you can take before needing to add a mister or any other additional equipment.
If you can tell us more about your setup we can get you sorted out without you spending unnecessary money. I live in MA where winter gets pretty dry. I don't even need to mist my enclosures in winter unless maybe to boost humidity during shed.
What type/size enclosure?
What substrate?
How are you heating the enclosure?
What type/size water bowl?
This ^
Substrate .. I always recommend orchid bark / reptile bark as it holds moisture well , enables you to control the humidity levels plus it enhances the look of the snake and the surroundings .
Sent from my iPhone using Tapatalk Pro
-
The Following User Says Thank You to Zincubus For This Useful Post:
Craiga 01453 (10-16-2020)
-
Re: Increasing and controlling humidity
I don't recommend a fogger. They tend to lower temps as the fog comes in coolish. They sell misting systems, but probably not needed for a BP. I use this for my Rhacodactylus, but they need 80-90% humidity peaks with drops not too much lower.
https://www.mistking.com
Substrate, as said, is probably your answer. Also depends on cage type and heating elements used. A nice PVC cage with a water bowl will get you 50% humidity all year long.
I noticed some of these questions were asked in a previous post about temp control, but you never answered. It would helpful if you told us more about your setup.
Last edited by dakski; 10-16-2020 at 09:29 PM.
-
The Following 2 Users Say Thank You to dakski For This Useful Post:
Craiga 01453 (10-16-2020),jmcrook (10-16-2020)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|