» Site Navigation
1 members and 2,808 guests
Most users ever online was 6,337, 01-24-2020 at 04:30 AM.
» Today's Birthdays
» Stats
Members: 75,078
Threads: 248,524
Posts: 2,568,615
Top Poster: JLC (31,651)
|
-
Registered User
Question about Temps / New AP Cage
Hello all,
My AP Cage is shipping out this week and I ordered one with an RHP included.
I've never used an RHP previously, so I'm wondering what sort of temp range I should be looking for.
Currently on my tub I have a UTH that shuts off at 87 degrees...and a CHE that I use when required. Ambient Temps stay between 80-84 during the day, and drop into the high 70's at night.
What Temps should I be shooting for on the "hot side" with the RHP?
-
-
Re: Question about Temps / New AP Cage
I have hot side set to 90°F and cool side to 80°F. I am using an AP TO, with RHP as well.
Sent from my SM-N950U using Tapatalk
0.1 Mexican Black Kingsnake (Tynee)
0.1 BEL Ball (Luna)
0.1 Sunglow Boa (Pippi Longsnake)
0.1 Woma Python (Uma)
WANT LIST
- Mangrove Snake
- Russian Rat Snake
- Eastern Indigo
- Black Milk Snake
- False Water Cobra
- Rhino Rat Snake
- Thai Bamboo Rat Snake
- Western Hognose
- Kenyan Sand Boa
-
The Following User Says Thank You to Charles8088 For This Useful Post:
-
I'm running a few AP enclosures and my RHPs are all set to 82 degrees ambient. I don't have any UTH as I don't see them as being necessary.
Over the years I stopped providing a heat gradience and notices a healthier feeding response so I stuck with it.
Also, the placement of the probe makes a difference. I have my probe as low as possible in the terrarium so I know my BPs are getting the temp that I set on the thermostat.
Last edited by Mr. Misha; 08-24-2020 at 04:51 PM.
Reason: Added photo
0.1 Reg. BP Het. Albino (Faye),
1.0 Albino BP (Henry),
0.1 Pastave BP Het. Pied (Kira)
1.0 Pied BP (Sam)
1.0 Bumble Bee BP (Izzy)
-
The Following User Says Thank You to Mr. Misha For This Useful Post:
-
Registered User
Re: Question about Temps / New AP Cage
thanks. I didn't think i could achieve that much of a temp gradient with an RHP. Of course, your cage may be a lot bigger than mine.
I ordered the 3 foot by 2 foot cage....
Last edited by Andiamo; 08-24-2020 at 04:52 PM.
-
-
Re: Question about Temps / New AP Cage
It also depends on your room ambient temp. Right now my office/snake room stays at about 84 degrees so all the terrariums are around that temp and the RHPs don't even kick on. If you live in a place where it gets very cold, you may have to bump it up in the winter to 90 to make sure the "cool" side of terrarium is properly heated. You'll have to play around with it.
I do highly recommend on getting a proportional thermostat if you haven't purchased one yet. They are a bit pricey, but with proportional feature, the RHP kicks at a certain percentage just enough to keep the temps up. I personally have had the Herpstat thermostats and absolutely love them. They have a lot of different safety features including a probe for humidity, temp night drops and even can turn on and off light feature.
0.1 Reg. BP Het. Albino (Faye),
1.0 Albino BP (Henry),
0.1 Pastave BP Het. Pied (Kira)
1.0 Pied BP (Sam)
1.0 Bumble Bee BP (Izzy)
-
The Following User Says Thank You to Mr. Misha For This Useful Post:
-
Registered User
Re: Question about Temps / New AP Cage
I do have a thermostat that I'm currently using on my UTH...it's not a herpstat, but i heard those were the best to have. I plan on setting everything up for at least a day before I make the move....
-
-
Re: Question about Temps / New AP Cage
Originally Posted by Andiamo
I do have a thermostat that I'm currently using on my UTH...it's not a herpstat, but i heard those were the best to have. I plan on setting everything up for at least a day before I make the move....
If you're going to be using your UTH with the AP, you'll also need an additional thermostat for the RHP.
0.1 Reg. BP Het. Albino (Faye),
1.0 Albino BP (Henry),
0.1 Pastave BP Het. Pied (Kira)
1.0 Pied BP (Sam)
1.0 Bumble Bee BP (Izzy)
-
-
Registered User
Re: Question about Temps / New AP Cage
No, I'm going to ditch the UTH. Just stick with the RHP.
or at least that's the plan.
-
The Following User Says Thank You to Andiamo For This Useful Post:
-
Re: Question about Temps / New AP Cage
Originally Posted by Andiamo
No, I'm going to ditch the UTH. Just stick with the RHP.
or at least that's the plan.
That's what I would do as well. Keep it just in case, but most likely, you're not going to need it.
Sent from my SM-G950U using Tapatalk
0.1 Reg. BP Het. Albino (Faye),
1.0 Albino BP (Henry),
0.1 Pastave BP Het. Pied (Kira)
1.0 Pied BP (Sam)
1.0 Bumble Bee BP (Izzy)
-
The Following User Says Thank You to Mr. Misha For This Useful Post:
-
Registered User
Re: Question about Temps / New AP Cage
Do you think it's necessary to seal an AP cage for a BP?
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|