Do you even Vape bro? Vape/E-Cig Discussion

[jclaiborne]

Just built some dual coils came out to .9 ohms...have it set to 20 watts right now, but not sure if that's the correct wattage

[bigt0006]

Just built some dual coils came out to .9 ohms...have it set to 20 watts right now, but not sure if that's the correct wattage

Wattage is all preference with rebuildables as long as you dont go over the amp limits on your batteries. I vape at 30w on a .6ohm coil

Sent from my SPH-L720 using Tapatalk 2

[jclaiborne]

Wattage is all preference with rebuildables as long as you dont go over the amp limits on your batteries. I vape at 30w on a .6ohm coil

Sent from my SPH-L720 using Tapatalk 2

With a VV mod doesn't it regulate it so you can go over the amp limits?

[bigt0006]

With a VV mod doesn't it regulate it so you can go over the amp limits?

If its a built in battery yeah if it takes an 18650 or some other type of replaceable battery you still need to watch your amperage. The sigelei 150w recomends 2 vtc4 30 amp batteries and you can vape down to a .15 ohm build as long as you know you wattage limits and play around with ohms law

Sent from my LGLS740 using Tapatalk 2

[jclaiborne]

Ok I'm using my wife's IPV mini usable up to 30 watts and a .5 coil... the battery is an 18650 panasonic (ncr18650pf) I believe it's a 10 amp battery

[bigt0006]

Ok I'm using my wife's IPV mini usable up to 30 watts and a .5 coil... the battery is an 18650 panasonic (ncr18650pf) I believe it's a 10 amp battery

Should be ok. At 30w a .5 ohm coil will draw 7.7 amps

Sent from my LGLS740 using Tapatalk 2

[bigt0006]

On another note just got done patinaing a copper penny mod came out awesome


Sent from my LGLS740 using Tapatalk 2

[jclaiborne]

Ok I have yet another question...how accurate are these VV mods at reading resistance...when I meter out my coil with my multimeter it reads .9 every time I fire it on the mod the reading fluctuates from .9 to 2.9 and jumps all over. Should I just ignore what the mod reads out?

[bigt0006]

Usually if the resistance jumps like the its a loose connection to the coil. I used to have that problem till i switched all my rdas to grub nuts

Sent from my SPH-L720 using Tapatalk 2

[Felidae]

I didn't read back, so I don't know what you have (and cause of that I give stupid suggestion)but some VW mods cannot manage the resistance under 1 ohm. If in your case you're sure cannot be that,( and I gave stupid suggestion..), just ignore me